- M. Kazuhisa, Solid lubrication fundamental and applications. New York: National Aeronautical Space Administration, 2001, pp. 10–14.
- F. I. Ilie and C. M. Tita, "Tribological properties of solid lubricant nanocomposite coatings obtained by magnetron sputtered of MoS2/metal (Ti, Mo) nanoparticles,” Proc. of the Romanian Academy, vol. 8, no. 3, pp. 1–5, 2007.
- J. R. Jones, NASA SP-8063: Lubrication, friction, and wear, NASA Space Vehicle Design Criteria (Structures), NASA, June 1971, pp. 1–5.
- J. Jiang, R. D. Arnell and G. Dixit, “The influence of ball size on tribological behaviour of MoS2 coating tested on a ball-on-disk wear rig,” Wear, vol. 243, pp. 1–5, 2000.
- Y. Epshteyn and T. J. Risdon, “Molybdenum disulfide in lubricant applications – A review,” Presented at the 12th Lubricating Grease Conference, 28–30 January 2010, Goa, India, pp. 1–3, 2010.
- G. H. Xu, M. Zhu, J. Liu, Z. Zhou and H. Liang, “The effect of pre-treatment of substrate on fretting tribological behavior of MoS2 coatings,” Wear, vol. 255, pp. 246–252, 2003.
- M. Chhowalla and G. Amaratunga, “Thin films of fullerene-like MoS2 nanoparticles with ultra-low friction and wear,” Nature, vol. 407, pp. 164–167, 2000.
- A. Shankara, P. L. Menezes and K. R. Y Simha, “Study of solid lubrication with MoS2 coating in the presence of additives using reciprocating ball-on-flat scratch tester,” Sadhana, vol. 33, pp. 207–220, June 2008.
- N. P. Suh and H. C. Sin, “The genesis of friction,” Wear, vol. 69, pp. 91–114, 1981.
- Y. Wang, T. Lei and J. Liu, “Tribo- metallographic behavior of high carbon steels in dry sliding,” Wear, vol. 231, pp. 1–11, 1999.
- I. S. Grigoriev, Handbook of physical quantities. US: CRC Press, 1996, pp. 145–156.
- F. Bucche and D. L. Wallach, Technical physics. Wiley, 1994.
- R. Kurtus. Coefficient of friction values for clean surfaces. 2 November 2005. Available: http://www.school-for-champions. com/science/friction.htm.
- K. Holmberg and A. Mathews. Coating tribology properties, mechanisms, techniques and applications in surface engineering. UK: Elsevier, 2009, pp. 211–212.
- S. Mohan, V. Prakash and J. P. Pathak, “Wear characteristics of HSLA steel,” Wear, vol. 252, pp. 16–25, 2002.
- Y. Wang and T. Lei, “Wear behavior of steel 1080 with different microstructures during dry sliding,” Wear, vol. 94, pp. 44–53, 1996.
- C. Donnet, J. M. Martin, Th. Le Mogne and M. Belin, “Super-low friction of MoS2 coatings in various environments,” Tribology International, vol. 29, no. 2, pp. 123–128, 1996.
- J. J. Hu and J. S. Zabinski, “ Nanotribology and lubrication mechanisms of inorganic fullerene-like MoS2 nanoparticles investigated using lateral force microscopy (LFM),” Tribology Letters, vol. 18, no. 2, pp. 173–180, 2005.
- R. R. Sahoo and S. K. Biswas, “Microtribology and friction-induced material transfer in layered MoS2 nanoparticles sprayed on a steel surface,” Tribology Letters, vol. 37, no. 2, pp. 313–326, 2009.