[1]. A. G. Lamas, M. Almeida and H. M. M. Diz, “Slip-casting of alumina bodies with differential porosities”, Journal of the American Ceramic Society, Vol. 85, pp.3126 – 3132, (2002).
[2]. T. Natori, T. Shimaguchi and T. Yamada, “Method of forming cast article by slip casting”, United states patent, Vol. 4, pp. 621 - 632, (1989).
[3]. J. S. Reed, Principles of Ceramics Processing, 2nd edition Wiley, New York, (1995).
[4]. O. Aladesuyi, M. Pal, S. K. Das and K. O. Ajanaku, “Phase and microstructural evolution during sintering of mixture of 75:25 Nigerian kaolin and calcined alumina powder compacts”, Journal of Materials and Environmental Sciences, Vol. 8, No. 8, pp. 2682-2838, (2017).
[2]. T. Natori, T. Shimaguchi and T. Yamada, “Method of forming cast article by slip casting”, United states patent, Vol. 4, pp. 621 - 632, (1989).
[3]. J. S. Reed, Principles of Ceramics Processing, 2nd edition Wiley, New York, (1995).
[4]. O. Aladesuyi, M. Pal, S. K. Das and K. O. Ajanaku, “Phase and microstructural evolution during sintering of mixture of 75:25 Nigerian kaolin and calcined alumina powder compacts”, Journal of Materials and Environmental Sciences, Vol. 8, No. 8, pp. 2682-2838, (2017).
[5]. M. Arif, S. K. Durrani1, M. Akram, N. Hussain and B. A. Hasan, “Fabrication of alumina wares by slip casting technology” Journal of Pak Mater Soc, Vol.5, No. 1, pp. 114-120, (2011).
[6]. ASTM C20 – 00, “Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water”, (2010).
[7]. S. A. Z. Al-Jeboori, Ph.D. Thesis, University of Technology, (2005).
[8]. T. Akrill, G. Bennet and C. Millar, "Physics", Edward Arnold Publishers Ltd, London, pp.118-119, (1979).
[9]. ASTM C773 – 88, “Standard Test Method for Compressive (Crushing) Strength of Fired White ware Materials”, Annual Book of ASTM Standards, (2011).
[10]. ASTM C1674 - 11, “Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity at Ambient Temperatures”, Annual Book of ASTM Standards, (2011).
[11]. ASTM D2240 – 05, “Standard Test Method for Rubber Property - Durometer Hardness”, (2010).
[12]. Y. Zhang and J. Binner, "Enhanced casting rate by dynamic heating during slip casting" Journal of the European Ceramic Society, Vol. 22, pp. 135–142, (2002).
[13] C. Falamaki and M. Beyhaghi, “Slip casting process for the manufacture of tubular alumina microfiltration membranes “Materials Science-Poland, Vol. 27, No. 2, pp. 427-441, (2009).
[7]. S. A. Z. Al-Jeboori, Ph.D. Thesis, University of Technology, (2005).
[8]. T. Akrill, G. Bennet and C. Millar, "Physics", Edward Arnold Publishers Ltd, London, pp.118-119, (1979).
[9]. ASTM C773 – 88, “Standard Test Method for Compressive (Crushing) Strength of Fired White ware Materials”, Annual Book of ASTM Standards, (2011).
[10]. ASTM C1674 - 11, “Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity at Ambient Temperatures”, Annual Book of ASTM Standards, (2011).
[11]. ASTM D2240 – 05, “Standard Test Method for Rubber Property - Durometer Hardness”, (2010).
[12]. Y. Zhang and J. Binner, "Enhanced casting rate by dynamic heating during slip casting" Journal of the European Ceramic Society, Vol. 22, pp. 135–142, (2002).
[13] C. Falamaki and M. Beyhaghi, “Slip casting process for the manufacture of tubular alumina microfiltration membranes “Materials Science-Poland, Vol. 27, No. 2, pp. 427-441, (2009).
[14]. H. Katsuki, J. Kim, S. Kim, J. Kim, J. Pee and W. Cho, “Influence of alumina content in the raw clay on the sintering behavior of Karatsu ware”, Journal of the Ceramic Society of Japan, Vol. 124, No. 8, pp. 833-837, (2016).
[15]. J. S. Magdeski, “The porosity dependence of mechanical properties of sintered alumina”, Journal of the University of Chemical Technology and Metallurgy, Vol. 45, No. 2, pp143-148, (2010).
[16]. A. Ouali, M. Heraiz, F. Sahnoune, H. Belhouchet, M. Fatmi and N. Saheb, “Effect of MgO addition on the mechanical and thermal properties of mullite synthesized through reaction sintering of Al2O3 and Algerian kaolin”, American Journal of Modern Physics, Vol. 2, No. 5, pp. 270-275, (2013).
[17]. C. Y. Chen, G. S. Lan and W. H. Tuan, “Preparation of mullite by the reaction sintering of kaolinite and alumina”, Journal of the European Ceramic Society, Vol. 20, pp. 2519-2525, (2000).
)