Document Type : Original Article

 
1.    McElroy, F., et al., Uses and applications of inductively coupled plasma mass spectrometry in the petrochemical industry.Spectroscopy, 1998. 13(2): p. 42-+.
2.    B.Y, C., PCA: The Basic Building Block of Chemometrics. 2012.
3.    Souza, R.M., C.L.P. da SILVEIRA, and R.Q. Aucelio, Determination of refractory elements in used oil by ICPOES employing emulsified sample introduction and calibration with inorganic standards. Analytical sciences, 2004. 20(2): p. 351-355.
4.    Yawar, W., Determination of wear metals in lube oils by flame atomic absorption spectrophotometry. Journal of Analytical Chemistry, 2010. 65(5): p. 489-491.
5.    Salvador, A., M. de La Guardia, and V. Berenguer, Determination of the total iron content of used lubricating oils by atomic-absorption with use of emulsions. Talanta, 1983. 30(12): p. 986-988.
6.    Barbooti, M.M., et al., Use of silica gel in the preparation of used lubricating oil samples for the determination of wear metals by flame atomic absorption spectrometry. Analyst, 1990. 115(8): p. 1059-1061.
7.    Bellido-Milla, D., et al., Rapid procedure to determine wear metals in lubricating oils and the analysis of variance in the evaluation of sample preparation procedures. Microchimica Acta, 2002. 138(1-2): p. 59-64.
8.    Costa, L.M., et al., Use of factorial design for optimization of microwave-assisted digestion of lube oil. Jurnal of the Brazilian Chemical Society, 2005. 16(6A): p. 1269-1274.
9.    Vahaoja, P., et al., Determination of wear metals in lubrication oils: a comparison study of ICP-OES and FAAS. Analytical sciences, 2005. 21(11): p. 1365-1369.
10.  Brown, R.J., Determination of trace metals in petroleum and petroleum products using an inductively coupled plasma optical emission spectrometer. Spectrochimica Acta Part B: Atomic Spectroscopy, 1983. 38(1-2): p. 283-289.
11.  Aucélio, R.Q., A.J. Curtius, and B. Welz, Sequential determination of Sb and Sn in used lubricating oil by electrothermal atomic absorption spectrometry using Ru as a permanent modifier and microemulsion sample introduction. Journal of Analytical Atomic Spectrometry, 2000. 15(10): p. 1389-1393.
12.  Saba, C.S. and K.J. Eisentraut, Determination of molybdenum wear metal in lubricating oils by atomic absorption spectrophotometry with a particle size independent method. Analytical Chemistry, 1979. 51(12): p. 1927-1930.
13.  Burguera, J.L. and M. Burguera, Analytical applications of emulsions and microemulsions. Talanta, 2012. 96: p. 11-20.
14.  Leite, C.C., et al., Determination of Fe, Cr and Cu in used lubricating oils by ET AAS using a microemulsion process for sample preparation. Analytical Methods, 2015. 7(8): p. 3363-3371.
15.  Ahmad, H., et al., determination of wear elements in tractor oil: comparison between aas and icp-oes techniques. Nigerian institution of agricultural engineers, 2014. 22(1): p. 19.
16.  CHEN, Z.-j., et al., Determination of Metals in Lubricating Oil with Domestic ICP-AES [J]. Guangzhou Chemical Industry, 2010. 4: p. 049.
17.  Marume, C., Elemental determination of lubricating grease using ICP-OES. 2015.
18.  Duyck, C., et al., Trace element determination in crude oil and its fractions by inductively coupled plasma mass spectrometry using ultrasonic nebulization of toluene solutions. Spectrochimica Acta Part B: Atomic Spectroscopy, 2002. 57(12): p. 1979-1990