[1] C. Cai, S. Tseng, M. Kuo, K. A. Lin, H. Yang, and R. Lee, "Photovoltaic Performance of N719 Dye based Dye-sensitized Solar Cell with Transparent Macroporous Anti-Ultraviolet Photonic Crystal Coatings", RSC Advances, Vol. 5, pp. 1-29, (2015).
[2] N. A. Omair, S. M. Reda, F. M. Al-Hajri, "Effect of Organic Dye on the Photovoltaic Performance of Dye-Sensitized ZnO Solar Cell", Advances in Nanoparticles, Vol. 3, pp. 31-35, (2014).
[3] J. Deenathayalan, M. Saroja, M. Venkatachalam, P. Gowthaman, "ZnO Nanorod based Dye Sensitized Solar Cells with Natural Dyes Extracted from AmaranthusCaudatus and Morus Alba", Journal of NanoScience and NanoTechnology, Vol. 2, No. 4, pp. 384-389, (2014).
[4] A. Fakharuddin, R. Jose, T. M. Brown, F. F. Santiago, Juan Bisquert, "A perspective on the production of dye-sensitized solar modules", Energy Environmental Science, Vol. 7, pp. 3952–3981, (2014).
[5] A. A. Khafaji, D. B. Alwan, F. H. Ali, W. A. A. Twej, "Influence of grain size, electrode type and additives on dye sensitized solar cells efficiency", Environmental Science: An Indian Journal, Vol. 12, No. 6, pp. 217-223 (2016).
[6] K. Guo, M. Li, X. Fang, X. Liu, B. Sebo, Y. Zhu, Z. Hu, X. Zhao, "Preparation and enhanced properties of dye-sensitized solar cells by surface plasmon resonance of Ag nanoparticles in nanocomposite photoanode", Journal of Power Sources, Vol. 230, pp. 155-160, (2013).
[7] R. Tagliaferro, D. Colonna, T. M. Brown, A. Reale, A. D. Carlo, "Interplay between transparency and efficiency in dye sensitized solar cells", Optics Express, Vol. 21, No. 3, pp. 3235-3242, (2013).
[8] R. Escalante, D. Pourjafari, D. Reyes-Coronado, G. Oskam, "Dye-sensitized solar cell scale-up: Influence of substrate resistance", Journal of renewable and sustainable energy, Vol. 8, No. 2, pp. 1-10, (2016).
[9] F. Santiagoa, F, Bisquert, J, Palomares, E, Haque, S. A, Durrant, J. R, "Impedance spectroscopy study of dye-sensitized solar cells with undoped spiro-OMeTAD as hole conductor", Journal Appled Physics, Vol. 100, No. 3, pp. 1-7, (2006).
[10] G. R. A. Kumara, C. S. K.Ranasinghe, E. N. Jayaweera, H. M. N. Bandara, M. Okuya, R. M. G. Rajapakse," Substrates by Atomized Spray Pyrolysis Technique and TheirSubsequent Use in Dye-Sensitized Solar Cells", The Journal of Physical Chemistry C, Vol. 118, No. 30, pp. 16479-16485, (2014).
[11] M. L. M. Napi, M. F. Maarof, C. F. Soon, N. Nayan, F. I. M, Fazli, N. K. A. Hamed, S. M. Mokhtar, N. K. Seng, M. K. Ahmad, A. B. Suriani, A. Mohamed, "Fabrication of Fluorine Doped Tin Oxide (FTO) Thin Films Using Spray Pyrolysis De Method for Transparent Conducting Oxide", Journal of Engineering and Applied Sciences, Vol. 11, No. 14, pp. 8800-880, (2016).
[12] S. Ngamsinlapasathian, A. Kitiyanan, T. Fujieda, and S. Yoshikawa,"Effect of Substrates on Dye-Sensitized Solar Cell Performance Using Nanocrystalline TiO2", ECS Transactions, Vol. 1, No. 33, pp. 7-15, (2006).
[13] R. Vijayalakshmi and V. Rajendran, "Synthesis and characterization of nano-TiO2 via different methods", Archives of Applied Science Research, Vol. 4 (2), pp. 1183-1190, (2012).
[14] Y. Wang, L. Li, X. Huang, Q. Lia and G. Li, "New insights into fluorinated TiO2 (brookite, anatase and rutile) nanoparticles as efficient photocatalytic redox catalysts", RSC Advances, Vol. 5, No. 43, pp. 34302-34313, (2015).
[15] C. H. Wei and C.M. Chang, "Polycrystalline TiO2 thin films with different thicknesses deposited on unheated substrates using RF magnetron sputtering", Materials Transactions, Vol. 52, No.3, pp. 554-559, (2011).
[16] H. Sh. Wu, and Y. L. Wang, "Effects of annealing temperature on the structure and properties of TiO2 nanofilm materials", Advanced Materials Research, Vol. 531, pp. 203-206, (2012).
)