Document Type : Original Article

  1. M. Kazuhisa, Solid lubrication fundamental and applications. New York: National Aeronautical Space Administration, 2001, pp. 10–14.
  2. F. I. Ilie and C. M. Tita, "Tribological properties of solid lubricant nanocomposite coatings obtained by magnetron sputtered of MoS2/metal (Ti, Mo) nanoparticles,” Proc. of the Romanian Academy, vol. 8, no. 3, pp. 1–5, 2007.
  3. J. R. Jones, NASA SP-8063: Lubrication, friction, and wear, NASA Space Vehicle Design Criteria (Structures), NASA, June 1971, pp. 1–5.
  4. J. Jiang, R. D. Arnell and G. Dixit, “The influence of ball size on tribological behaviour of MoS2 coating tested on a ball-on-disk wear rig,” Wear, vol. 243, pp. 1–5, 2000.
  5. Y. Epshteyn and T. J. Risdon, “Molybdenum disulfide in lubricant applications – A review,” Presented at the 12th Lubricating Grease Conference, 28–30 January 2010, Goa, India, pp. 1–3, 2010.
  6. G. H. Xu, M. Zhu, J. Liu, Z. Zhou and H. Liang, “The effect of pre-treatment of substrate on fretting tribological behavior of MoS2 coatings,” Wear, vol. 255, pp. 246–252, 2003.
  7. M. Chhowalla and G. Amaratunga, “Thin films of fullerene-like MoS2 nanoparticles with ultra-low friction and wear,” Nature, vol. 407, pp. 164–167, 2000.
  8. A. Shankara, P. L. Menezes and K. R. Y Simha, “Study of solid lubrication with MoS2 coating in the presence of additives using reciprocating ball-on-flat scratch tester,” Sadhana, vol. 33, pp. 207–220, June 2008.
  9. N. P. Suh and H. C. Sin, “The genesis of friction,” Wear, vol. 69, pp. 91–114, 1981.
  10. Y. Wang, T. Lei and J. Liu, “Tribo- metallographic behavior of high carbon steels in dry sliding,” Wear, vol. 231, pp. 1–11, 1999.
  11.  I. S. Grigoriev, Handbook of physical quantities. US: CRC Press, 1996, pp. 145–156.
  12. F. Bucche and D. L. Wallach, Technical physics. Wiley, 1994.
  13. R. Kurtus. Coefficient of friction values for clean surfaces. 2 November 2005. Available: http://www.school-for-champions. com/science/friction.htm.
  14. K. Holmberg and A. Mathews. Coating tribology properties, mechanisms, techniques and applications in surface engineering. UK: Elsevier, 2009, pp. 211–212.
  15. S. Mohan, V. Prakash and J. P. Pathak, “Wear characteristics of HSLA steel,” Wear, vol. 252, pp. 16–25, 2002.
  16. Y. Wang and T. Lei, “Wear behavior of steel 1080 with different microstructures during dry sliding,” Wear, vol. 94, pp. 44–53, 1996.
  17. C. Donnet, J. M. Martin, Th. Le Mogne and M. Belin, “Super-low friction of MoS2 coatings in various environments,” Tribology International, vol. 29, no. 2, pp. 123–128, 1996.
  18.  J. J. Hu and J. S. Zabinski, “ Nanotribology and lubrication mechanisms of inorganic fullerene-like MoS2 nanoparticles investigated using lateral force microscopy (LFM),” Tribology Letters, vol. 18, no. 2, pp. 173–180, 2005.
  19. R. R. Sahoo and S. K. Biswas, “Microtribology and friction-induced material transfer in layered MoS2 nanoparticles sprayed on a steel surface,” Tribology Letters, vol. 37, no. 2, pp. 313–326, 2009.